Does your Hisense TV keeps turning on and off itself? When you Turn on Hisense TV, it keeps Restarting. Most People often face the same looping Issue, so you don’t have to worry about this. With the Right troubleshooting Steps, you can solve this problem in a few minutes.
In this article, I will explore all the possible reasons why Hisense TV keeps Turning on and off Issue. And practical solutions to solve these reasons. You need to read this guide carefully and follow each step accordingly.
Table of Contents
5 Reasons Why Hisense TV keeps turning on and off?
I noticed some reasons for the “Hisense TV keeps Turning on and Off” Issue. I will tell you all the possible reasons for this looping problem. If you reach a reason, then fixing this Issue will be easy.
1. Power supply issues
One of the primary and basic reasons for Hisense TV to keep restarting is a Power Supply Issue. Unstable Voltages, Faulty Cables and Power Supply malfunctions can cause this problem. Also, Check the power cable and Power Outlet. Sometimes, faulty power outlets can be a reason.
2. Hardware Problem
Hisense TV keeps looping on and off, possibly due to hardware malfunction. It can be due to the Power Board or Main Board malfunction.
3. Problems with remote control
Sometimes your TV remote malfunction or it get stuck, due to which the TV keeps turning on and off. TV remote gives continuous signals to your Smart TV, which keeps it looping.
4. Software glitches
Hisense Smart TV works on Software like all other smart appliances. Sometimes, Software Glitches and Bugs can lead your Hisense TV to different problems like sound issues and blinking lights and also include Hisense TV repeatedly powering on and off.
5. Firmware Issue
Firmware and Operating Systems can cause minor to major issues, including repeatedly on and off in your Hisense Smart TV. Outdated Firmware is prone to malfunctions, bugs and security issues.
METHODS TO Resolve Hisense TV’s On-Off Loop with Ease
After you recognize a reason, then it will be easy to fix. In this section, I will explore all the possible methods to fix the “Hisense TV keeps Turning On and OFF” issue. Implement all the troubleshooting steps one by one to fix it.
1: Power cycle your Hisense TV
Before going toward any hard method, let us start with the Power cycle. Power Cycle, also known as Soft Reset, Solves temporary glitches and Bugs. It will Refresh your Hisense TV system and Optimize Overall Performance. Follow the steps below to perform a power cycle.
- Turn Off your Hisense TV.
- Unplug it from the Power Outlet.
- Press and Hold the Power button on your Hisense TV for 60 sec.
- Now Plug your TV back into the Electrical Power outlet.
- Turn on your TV back.
- The power cycle is done.
Power Cycle will erase all the temporary glitches and cache files, which will optimize your Hisense TV and also solve issues like No Sound, Red light blinking, and repeatedly turning on or off.
2: Check the Power Supply
Unstable voltage can cause your TV to behave weirdly. It can lead to several issues like Red light blinking, Sound issues, and Repeatedly turning off / on the issues.
Use a Stabilizer to stabilize the voltage flow and check if the power cable is damaged or faulty, then replace it.
3: Check the power button.
If your Hisense TV turns on and off repeatedly, Check the power button of your TV. Sometimes, the Power button gets stuck in a position, leading your TV to get stuck in a looping of on and off. If it’s Pressed, then try to release it. If you are not able to fix it yourself, then take it to an electrician.
4: Check Remote Control
You should also have your TV remote control. The stuck button on the TV remote can be the reason for this on/off looping on Hisense TV. You can also remove batteries from the TV remote to check whether it’s the remote’s fault.
If buttons are stuck on the TV remote, you must repair it. Open the screws at the back and then clean your remote. Then, assemble the buttons and Chips of the remote carefully.
5: Update Firmware
Sometimes, Hisense TV turns on and Off due to Outdated Firmware. Outdated Firmware means you are not getting support and the latest features on your device.
To update the Firmware of your Hisense Smart TV, you can follow these steps:
- Connect your TV to a stable internet connection.
- Press the Menu button on your TV remote control.
- Navigate to “Support” and press OK.
- Now, Select “System Update” and press OK.
- Select “Check Firmware Upgrade” and press OK.
- If a new firmware update is available, select “Upgrade” or “Download” and press OK.
- Follow the on-screen instructions to install the update.
Once the update is installed, your TV will restart.
6: Perform a factory reset.
If all the above troubleshooting didn’t work for you, then the last option is to perform a Factory Reset on your Hisense TV. Factory Reset is an option when you are facing stubborn Technical errors.
Remember that Factory Reset will Erase all the data like apps, Account information and Saved passwords. So before Hard resetting Hisense TV, You should back up your important data.
To Perform a Factory Reset, Follow the Steps below:
- Press the Menu Button on your TV Remote.
- Navigate to “Support” and Press OK.
- Scroll to “System Update” and Press OK.
- Select “Advanced Settings” and Press OK.
- You must select ” Reset to Factory Default Setting” and Press OK.
- A prompt will ask for the Reset Code. Enter the Reset code. And Confirm it.
- Press “YES,” and it will start the FAcotry Reset.
Your Hisense TV will Restart, and It will restore to factory default settings.
Hopefully, Your “Hisesne TV keeps Turning On and OFF” issue will get fixed after performing the hard reset.
Contact Hisense Customer Support
Suppose you still face the repeatedly on and off Issue on your TV. Then it’s time to Contact Hisense Support. They will guide you, or you can also get an appointment with Technician if your Hisense TV is under warranty.