6 Steps to fix-Hisense Tv Remote Not WORKING

Hammad Nasar

Updated on:

Hisense tv remote not working

If the Hisense TV remote is not working, try replacing the batteries. If the remote still does not work, try resetting it. To reset the remote, remove the batteries and press and hold the power button on the remote for 10 seconds. Then, press and hold each button on the remote for 3 seconds.

Hisense TV is a reliable and affordable choice if you are searching for a budget-friendly Smart TV, Which offers you all the latest technology and updated features in your budget category. Like other electronic devices, you can face bugs or malfunctions in Hisense TV. It’s the part of our life where everything could be better; you can face smaller to bigger issues with any device at any time.

Hisense Tv Remote Not Working
Hisense Tv Remote Not Working Image created by Ai.


Sometimes, you try to change the channel or turn up/down the volume of your Hisense TV, but you realize that your Hisense remote is not working anymore. Will you throw that remote to thrash?

No, because after reading this article, you can easily troubleshoot your Hisense TV remote, which is not working now.


Possible Problems and Solution for “Hisense Tv Remote Not Working”

I tried to Summarize all Possible Solutions for your Hisense TV remote, Which is no longer Working.

See the Table Below:

ProblemImpactSolution
Remote not respondingUnable to control the TV1. Check if the batteries are dead or incorrectly installed. Replace or reinsert them.
2. Make sure there are no obstacles blocking the remote’s signal to the TV.
3. Try resetting the remote by removing the batteries and pressing all the buttons for a few seconds.
4. If the remote still doesn’t work, consider getting a replacement.
Remote buttons not workingSome functions may be inaccessible1. Clean the remote’s buttons and the surface beneath them to remove dirt or debris.
2. Check if specific buttons are stuck; gently tap them to release any obstructions.
3. Test the remote with other functions; if only specific buttons don’t work, it may be a hardware issue.
4. If the entire remote is unresponsive, try the solutions for “Remote not responding” above.
Remote pairing issuesRemote cannot communicate with the TV1. Ensure the TV and remote have fresh batteries and are within range of each other.
2. Look in the TV’s settings menu for an option to re-pair the remote. Follow the on-screen instructions.
3. If possible, consult the TV’s user manual for specific pairing instructions.
4. If all else fails, contact Hisense customer support for assistance.
Infrared sensor problemsRemote signals not reaching the TV1. Check if the TV’s infrared sensor is obstructed by objects or dust. Clean it gently if necessary.
2. Ensure there’s sufficient ambient lighting, as extreme brightness or darkness can affect IR sensors.
3. If the sensor is damaged, contact Hisense customer support or a professional technician for repair.

Hisense TV Remote Not Working? LET’S Solve it

Malfunctions in Electronic devices are not a new thing you must worry about. Like other appliances, Smart TV and its Accessories are prone to glitches and malfunctions. But Solving these errors is a simple task.

Hisense Tv Remote Not working

This guide will guide you through different reasons and their solutions for the Hisense TV remote not working properly.


You can Solve this problem in a few steps. If you read this article carefully, you dont need an electrician to repair your Hisense TV remote.

1. Replace Batteries

First of All, Check the Batteries of Your TV remote because Sometimes Low Voltage or Dead Batteries are the main culprits behind TV Remote malfunctions.

Remove the Old Batteries and install new batteries in your Hisense Remote. Remember you shook. Replace the pair of batteries, not only one, because that can cause a voltage difference, which may result in the same problem that your Hisense TV remote is not working fine.

2. Reset Hisense TV Remote

If your Hisense TV remote is not working even after changing batteries, this problem can be due to a Remote Glitch or a bug due to the Incorrect sequence of buttons on the Remote.

Nowadays, Remotes of Smart TV are Mostly using WI-FI Connections to operate. So, repeatedly pressing the buttons of the Remote in different patterns can cause a malfunction in the remote.

This problem can easily be solved by resetting your TV remote. By following the given steps, you can easily reset your TV Remote.

  1. Remove the Batteries of Your Hisense TV remote. 
  2. Press the Power Button on Your Remote. Hold it for 10 seconds and release it.
  3. Now you have to press and hold each button present on your Remote for 3 sec one by one, and release after 3 seconds.
  4. Wait for a Few Minutes and install the batteries in the Remote Again.

It’s done; your Hisense TV REmote gets reset.

Now your Hisense TV REmote is working fine. If not, then Let’s Move to the next Solution.

Watch the Following Video to see the process how to Reset your Tv Remote.

If Your Hisense TV Remote Not Working? Reset the Remote!

3. Restart Hisense TV

Sometimes, the issue is not Remote; it can be any Bug or Lag in your Smart TV. What do you have to do?

Restart your Smart TV, or Soft Reset it. This is a very simple Process. Follow the below given steps.

  1. Unplug Your Smart TV from the Power Source.
  2. Hold and Press the Power Button for 30 to 60 Seconds.
  3. Release the Button
  4. Wait for a Few Minutes 
  5. Now plug in your power source
  6. Turn On your Smart TV
  7. The Restart Process is done

By doing these simple steps, your TV remote may start working because sometimes the issue is not in the remote; it can be in the Smart TV.

Also Read: How To Reboot Vizio Tv?


4. Clean Hisense Tv Remote

If Your Hisense TV Remote is Not Working, consider Cleaning remotely from the outside and inside. Sometimes, dirt can disturb the circuits of the remote, which can cause malfunctions in the TV remote.

Follow the Following steps to Thoroughly Clean your TV remotely.

  1. For Cleaning from the outside, you can use any clean Cloth or purchase specific washing clothes from the accessories shop.
  2. For cleaning from the inside, you have to open the remote
  3. There will be screws on the back side of the TV Remote. Open these Screws with the help of a screwdriver.
  4. Remember to place these screws in a safe place so that you don’t lose any of the screws.
  5. Inside the remote, there will be a Chip or circuit board. If there is any screw on Painted Circuit Board, unscrew it and separate it from the plastic body.
  6. Now Carefully Wash the Painted Circuit Board with Siprit or alcohol and Let it Dry.
  7. Also, clean the rubber button and plastic cover with the help of any soft soap and let them dry.
  8. After the PCB gets dry, assemble the PCB and Plastic Cover in the order you adopt in the opening.
  9. Install batteries Now.

So, Finally, Your Remote cleaning is done Now.

Any particle of dirt which may cause a malfunction in the circuit board is now removed. Hopefully, your Hisense TV remote is Working fine.

See the Following Video, In this Video You will learn about the process of cleaning your Remote , Video show remote of different brand of remote but this process is same for Hisense Tv Remote.

If Your Hisense Tv Remote not working see this video to Clean your Remote.

5. Use Universal Remote

Suppose your Hisense TV remote is not working after all the above steps. In that case, you can use the Universal Remote option to operate your Hisense TV.


Universal Remotes are programmed in such a way that they can be paired and worked with multiple devices. This option can be a price cutter for many people.


You can Buy a universal remote as an alternative to your Hisense TV Remote, which is now not working.

6. Use Virtual Remote Apps

Virtual Apps are a modern and hassle-free option for controlling your Smart TV without a physical remote.

Sometimes, your physical TV remote gets misplaced and lost, or your Hisense TV remote must be fixed due to any problem. You can use any Virtual Remote Application on your smartphone to control your TV.

Multiple options for smart remote control apps are available on the App Store or Google Play Store. Just go to the Google Play store and write “Hisense TV Remote. ” You will get a lot of options in the search results.

Smart Apps For Remote
Google Playstore Search Result

Hisense TV has also launched its own official App, the RemoteNow App. It’s Easy to use. You can download this App for Android and iPhone from their relative app store.

  1. RemoteNow App Download For Android.
  2. RemoteNow App Download For iPhone.

Still Not Working?

If, after doing all the steps above, your Hisense TV remote is not working, consider some of the points below.

  1. See any Obstacle Between Remote and Smart TV.
  2. Check the Infrared Waves With the help of any Instrument.
  3. Try to Change the Location of Your TV.
  4. Check That your Smart TV and Hisense Remote Use the same Wi-Fi connection?

Final Wordings

Bugs and Malfunction in electronics are part of life. Human made these and humans are also prone to mistakes. So if you face any problem in electrical appliances you have not to worry because we are here to guide you about all possible solutions to these glitches.

In This comprehensive article we guide you about the solution if your Hisense Tv not working well. Before throwing your remote into thrash you have to implement all the steps given in this article so that you can save money and also you can solve problem. It doesn’t need any Tech mind to counter this Problem.

Frequently Asked Question (FAQs)

Q1: My Hisense TV remote is not responding at all. What should I do?

A1: First, check if the batteries in the remote are dead or incorrectly installed. Replace or reinsert them if necessary. Make sure there are no obstacles blocking the remote’s signal to the TV. Try resetting the remote by removing the batteries and pressing all the buttons for a few seconds. If the issue persists, consider getting a replacement remote.

Q2: Some buttons on my Hisense TV remote are not working. What could be the problem?

A2: Buttons not working could be due to dirt or debris under the buttons. Try cleaning the remote’s buttons and the surface beneath them. Check if specific buttons are stuck and gently tap them to release any obstructions. If only specific buttons are affected, it may be a hardware issue, and you might need a replacement remote.

Q3: My Hisense TV remote won’t pair with the TV. How can I fix this?

A3: Ensure that the TV and remote have fresh batteries and are within range of each other. Check the TV’s settings menu for an option to re-pair the remote, and follow the on-screen instructions. Consult your TV’s user manual for specific pairing instructions if available. If you still can’t pair the remote, contact Hisense customer support for assistance.

2 thoughts on “6 Steps to fix-Hisense Tv Remote Not WORKING”

Leave a comment